To use AMD Freesync, there're some requirement with graphics cards, graphics drivers and certified monitors. 1. A compatible GPU with a DisplayPort connection. Compatible GPUs include all AMD Radeon™ graphics cards beginning with Radeon™ HD 7000 Series, released in 2012, and all newer Radeon consumer graphics products.Other GPUs, such ...
No, as Linux system should automatically identify and recognize the monitor.
Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.
On some monitors, there is a power button lock that locks the power and power button in the ON position. There is also a menu lock feature which can lock and unlock the OSD (On-Screen Display) Menu. Power Lock: To lock the Power Button press and hold both the [1] button and the down arrow button for 10 seconds. OSD Lock: ...
This can be caused by a long cable or docking stations. Longer cables may be prone to ghosting, lines, double images, or poor focus. The improper shielding of the cables can cause a shadowing or ghosting effect also. We recommend to check the video cable and, if possible, use HDMI Premium certificate cable for long distance connectio...
To output: 1.1080p content at 144Hz, you will need either a dual-link DVI, a DisplayPort, or an HDMI 1.3 or higher cable. 2. 1440p at 144Hz, you will need at least an HDMI 2.0 or a DisplayPort 1.2 cable. 3.4K at 144Hz, you will need a HDMI 2.1 or a DisplayPort 1.4 cable which can carry 120Hz signal without compression.
MPRT and FreeSync are incompatible with each other because: MPRT will KEEP the refresh rate at a high and constant point. FreeSync will CHANGE the refresh rate continuously in a range between the minimum and maximum rate of the monitor. Therefore, all ViewSonic monitors that have MPRT(1ms) and FreeSync are not able to have both functio...
You can refer to this video. 1. Lay the monitor unit face down on a flat surface, using the soft bag received or a soft material to avoid damaging the screen. 2. Insert and align the Neck of the stand (Do NOT attach the base to the neck) into the stand slot on the display. 3. Firmly push the neck into the slot while securing t...
Your ViewSonic monitor must be set to the Main display. To verify this please follow the steps below: 1. Right click on your desktop and select “Display Settings”. 2. Click on the display number at the top that you want to make the main display and check the “Make this my main display box” under Multiple displays. 3. If th...
Set the resolution higher. Test the monitor on a different computer to isolate the problem. Please follow the instructions below on how to change the resolution on a computer running Windows 10. To change the resolution in Windows, do the following: Right-click on an empty area of the Windows® desktop. From the pop-up menu, select Di...